This last part of my Colombian photo stories is a short flashback. In general, I was surprised how many people spoke English, especially on the Caribbean coast. I expected less people to do so, as I have experienced it that way in Ecuador, Perú and Bolivia earlier. However, it might still be quite hard to get around the country without speaking any Spanish.
There are a bunch of different cables needed to connect the controller, camera and perhaps additional equipment like a pan/tilt head and its controller.
When I was still waiting for my rail and controller’s parts to arrive, I started with building the shutter cables (2.5mm jack and N3 – for Canon EOS 500D and 6D).
I used the 2.5mm stereo jack with a cable I have ordered and soldered on a 3.5mm stereo jack on the other side. Pretty easy. This one’s for the 500D and similar models.
So, all the parts I have ordered have arrived a long time ago.
Let’s talk about the rail now… Mr. Chronos Chris Field has made some pretty useful videos explaining how to assemble it. I think these should explain pretty much everything needed. I’ll just shortly sum up my steps. First one was to create the four threads at the ends of the rail with the 3/8 x 16 tap & die. This was kind of a pain-in-the-ass job and took quite some time, though it’s important to do it thoroughly and hold the tap & die really straight in order to get clean, straight threads. I got the screws for these holes at a nearby Harley Davidson garage, they’re pretty hard to find around here cause we have metric standards.
There we go, a short timelapse video, trying to show a tiny bit of Sweden's endless beauty. The shots were taken mainly in Sarek National Park, but at some other locations too. We took a four-day trip to Sarek National Park in the far north of Sweden, walked about 100 km within a 72 hour timespan, and hence were able to see what's likely to be the most beautiful views we've ever seen.
Due to some issues in the process of building my Chronos system and because I had tons and tons of things to do for other projects, I have not been posting that much about it recently. I have quite something to write about and I’ve learned tons of things. Will be posting new pictures as well as more articles soon.
I've got quite some words left, but hardly any photos from these last days. So here's a short timelapse clip, followed by the end of the story. On Thursday morning we took the 9 am bus to La Paz. After an hour or something, everyone had to leave the bus and get on a boat, while the bus was being moved across a leg of the lake with another boat. After another couple hours we arrived in La Paz around 1 pm. The bus route coming from the west offers an impressive view of the whole city, spreading its buildings all across hills and valleys, as so many South American cities do. We walked to a bed & breakfast called […]
So I’ve spent the last three weeks with doing lot of research and browsing online shops. The result is a shopping list with all the stuff I needed to buy or order to build the rail and controller, which basically consists of most parts listed on Chris’s parts list but with links to online shops in or near Switzerland. Of course, many of the parts are not exactly the ones he used.
I ordered a bracket set from Kyle and Chris which includes carriage, spacers, anti-backlash nut bracket as well as front and end brackets. They have shipped this stuff only a couple days after my order and I have received these beautiful parts two days ago.
I’m using the common abbreviation MoCo here, which stands for motion control. It’s been a few months now that I’ve decided to build my own motion control system for timelapse photography. Back then I’d already spent some late night hours researching the different models on the market being sold pre-built as well as the most popular DIY system out there. I was too busy planning my South America & New York trip as well as traveling to some other places last fall to start the project so I decided to start it once I’m back. This is the point I’m at right now. There’s still lots of things to do, but I’m gonna start the project now.
NYC in Motion, a timelapse short film of the world’s most fascinating city.
I was stopping by in New York City between Christmas Day and January 3 before heading to Latin America. As always, the days went by way too fast. And as always, I had an awesome time in the city that never sleeps.
So I’ve installed Magic Lantern on my 500D / Rebel T1i / Kiss X3 last December and used it for the first time when I got to New York on Christmas Day. I really put ML on my camera because of the advantages for timelapse photography. It should be nice to have one less thing to carry with you when shooting and making your way to the spots you’re shooting at. I got the hang of the menus and the basic functionalities in a couple minutes. Of course the menus do look very different from the default Canon firmware menus, though they are designed quite user-friendly and logically. They’re packed with so many functions though. I instantly liked the firmware and its […]